Elektro-Automatik - Digital Interface Cards for EL/ELR PS/PSI/PSE/PSB 9000 2U-3U

Product Overview:

EA-IF-AB

  • Retrofittable, simple installation (plug 'n play)
  • Easy configuration via a setup menu on the device
  • Galvanic isolation up to 2500 V

EA-IF-KE4

  • Retrofittable, simple installation (plug 'n play)
  • Easy configuration via a setup menu on the device
  • 3 way interface with
    • Ethernet (LAN)
    • USB
    • Analog
  • Compatible to series
    • EA-PSI 9000 T
    • EA-EL 9000 T
    • EA-PS 9000 T

EA-IF-KE5

  • Retrofittable, simple installtion (plug 'n play)
  • Easy configuration via a setup menu on the device 
  • Three choices to select from
    • IF-KE5 USB (1x USB)
    • IF-KE5 USB/LAN (1x USB + 1x Ethernet
    • IF-KE5 USB/ANALOG (1x USB + 1x Analog)
  • Compatible to series
    • EA-PS 3000 C
    • EA-EL 3000 B
More

EA-IF-AB

General Series EA-IF-AB offers a set of pluggable, digital interface modules for all series since 2012 which feature a module slot, such as EA-ELR 9000, EA-PSE 9000, EA-PSI 9000 and more, as well as upcoming series of programmable power supplies or electronic loads, which feature a suitable slot. LabView and programming languages Ready-to-use LabView VIs for interfaces of type RS232 and Ethernet are included. The other interfaces can be integrated into any kind of control application. The communication protocol is open and included in the doc- umentation. Thus it can be integrated in virtually any programming lan- guage. Software and drivers The devices of the series which can host these modules are delivered with an USB stick which includes documentation, drivers and software.

EA-IF-KE4

The optionally available and retrofittable interface module IF-KE4 extends the standard USB port featured in the series EA-EL 9000 T, EA-PS 9000 T and EA-PSI 9000 T by a three-way interface front.

It offers two digital interface ports, Ethernet/LAN and USB, as well as an analog interface connector as Sub-D 15-pole version. These interfaces can be used to adapt and connect the devices to a choice of analog and digital control applications.

EA-IF-KE5

The optionally available and retrofittable interface modules IF-KE5 can be installed in the series EA-EL 3000 B and EA-PS 3000 B, adding one or two digital ports or also an analog port.

The analog port (sub-d, 15 pole) is coupled with an USB, such as with the combination of USB + LAN. The USB plus analog combination offers the possibility for the user either use digital or analog remote control. The USB, which is included in all three variants, is not only used for digital remote control via SCPI or ModBus command, it also serves for firmware updates.

Product Variants

CANopen-Interface EA-IF-AB-CANO to the product
RS232-Interface EA-IF-AB-RS232 to the product
PBUS DPV1-Interface EA-IF-AB-PBUS to the product
Ethernet 1 Port-Interface EA-IF-AB-ETH1P to the product
Interface KE5 EA-IF-KE5 USB to the product
Profinet 1 Port-Interface EA-IF-AB-PNET1P to the product
Interface KE5 EA-IF-KE5 USB/LAN to the product
Interface KE5 EA-IF-KE5 USB/Analog to the product
Modbus-TCP 1 Port Interface EA-IF-AB-MBUS1P to the product
Ethernet 2 Port-Interface EA-IF-AB-ETH2P to the product
Modbus-TCP 2 Port Interface EA-IF-AB-MBUS2P to the product
Profinet 2 Port-Interface EA-IF-AB-PNET2P to the product
License code Multi Control EA-License code Multi Control to the product
CAN Interface EA-IF-AB-CAN to the product
Multi license code Multi Control EA-License code Multi Control to the product
EtherCAT-Interface EA-IF-AB-ECT to the product
Interface IF KE4 EA-IF KE4 LAN/USB/Analog to the product

More Product Information

EA-UTA12
  • USB Digital-to-Analog conversion
  • Resolution: min. 12 Bit
  • Simple installation, USB plug ’n play
  • No external supply voltage required
  • For older EA series with analog interface
  • Also for power supplies from other manufacturers
  • Status signals monitorable
  • 2 channels each for control & measuring
  • Software included
  • LabView drivers (VIs)
  • Tutorial for programming in other PC languages

EA-UPS DSP Multipower 1 kVA - 10 kVA
  • Online double conversion principle
  • DSP microprocessor controlled
  • UPS classification VFI-SS-111 by IEC 62040-3
  • Pure sine wave output
  • Advanced intelligent battery management
  • Short-circuit, overload and deep discharge protection
  • Fault alerts and status warnings
  • Cold start and energy saving features
  • Communication port with software
  • Compact size and user friendly operation
  • Options & accessories
  • Additional charging unit
  • Various external battery cabinets for extended autonomy
  • Pluggable SNMP & dry contact boards
  • Three-phase AC supply input*

EA-UPS Informer Compact 1000 VA - 3000 VA
  • Line interactive principle
  • UPS classification VI-SS-222 according IEC 62040-3
  • Pure sine wave output for any critical load
  • Boost and buck converter with automatic voltage
  • Advanced intelligent battery management
  • Short recharge time for batteries
  • User friendly LCD panel
  • Soft start for critical loads
  • Short-circuit, overload and deep discharge protection
  • Fault alerts and status warnings
  • Output voltage displayed on the LCD panel
  • Cold start and energy saving features
  • Communication port with software
  • Compact size and user friendly operation

EA-UPS Guard LCD 2, 650 VA - 2000 VA
  • Line interactive principle
  • UPS classification VI-SY-333 by IEC 62040-3
  • Boost & buck converter with automatic voltage regulation
  • Intelligent battery management
  • User friendly LCD panel
  • Soft start for critical loads
  • Short-circuit, overload and deep discharge protection
  • Overvoltage / Undervoltage protection
  • Input and output voltage displayed on the LCD panel
  • Cold start and energy saving features
  • Communication port with software
  • Telephone / Fax / Modem protection
  • Can be used without batteries as AVR
  • Compact size and user friendly operation

EA Programmable DC Power Supplies

  • Autoranging
  • Color Touchscreen
  • IF- Plug’n play interface-slot

Space Saving Instruments in Desktop Style (Series PS and PSI)

  • Autoranging
  • Color Touchscreen
  • 3-paths on board Interface

Space Saving Instruments in Tower style

  • Autoranging
  • Colored Touchscreen
  • IF KE Slot
EA-PS 800 19“ 80 W - 240 W
  • Wide input voltage range 90...264 V with active PFC
  • High efficiency up to 92%
  • Output power ratings: 58 W up to 240 W
  • Output voltages: 3.3 V up to 24 V
  • Output currents: 2.5 A up to 30 A
  • Single, double or triple output
  • Power limited, all outputs for full power
  • All outputs separately adjustable and regulated
  • Overtemperature protection (OT)
  • Remote on/off and power fail signal
  • Remote sensing
  • Options
  • Power sharing* between mains outputs
  • Without front plate

19 Inch Slide-in Housing (Series EL / Dissipative)
  • Autoranging
  • Color Touchscreen
  • Master-Slave-Bus for Parallel Connection
  • Two-quadrant expansion
  • 19″ Full slide-in, 2 height units
  • Analog- und USB-Schnittstelle
19 Inch Slide-in Housing (Series ELR / Power generation)
  • Autoranging
  • Color Touchscreen
  • IF KE Slot
Space Saving Desktop Style Devices (Series EL)
  • Function generator
  • Portable desk device (Desktop Style)
  • Optional Interfaces
  • USB/Analog/LAN-Ethernet
Space-saving Tabletop Devices in Tower Style (Series EL)
  • AC wide input range 90-264V
  • Flexible input stage for range extension
  • Intuitive operation thanks to color TFT touch panel

EA-SPI 100-300 100W - 300W
  • Wide range input 85...264 V AC with active PFC
  • Wide range input 120...360 V DC
  • Inrush current limiter
  • Output powers: 100 W, 150 W, 200 W and 300 W
  • Output voltages:
    • 5 V, 7.5 V, 12 V, 13.5 V, 15 V, 24 V, 27.5 V, 48 V, 54 V
  • Output currents: 2.1 A up to 60 A
  • Output voltage adjustable ±10%
  • Overvoltage protection (OVP)
  • Overcurrent protection (OCP)
  • Overtemperature protection (OTP)
  • Extern on/off
  • Remote sensing
  • Cooling SPI 100 and SPI 150 natural convection
  • Cooling SPI 200 and SPI 300 with fan
  • EMI EN 61000-6-1, EN 61000-6-3

EA-PS 500 150 W - 300 W
  • Wide input voltage range 90...264 V with active PFC
  • Output powers: 150 W up to 300 W
  • Output voltages: 12 V, 24 V, 42 V and 48 V
  • Output currents: 5.2 A up to 21 A
  • Output voltage adjustable
  • Remote sensing input
  • Overload- and short-circuit-proof
  • Overtemperature protection (OT)
  • Desk and wall mounting versions
  • Desk units with 4 mm sockets (type T)
  • Wall units with screw terminals (type R)

Elektro-Automatik

The EA Elektro-Automatik Group is Europe’s leading supplier in the area of power electronics for R & D and industrial application. At the headquarter in Germany in the industrial centre of North Rhine Westphalia more than 200 qualified associates, in a facility of 18000 m², research, develop and manufacture high-tech equipment for laboratory power supply, high power mains adaptors and electronic loads with or without power feedback.

Contact Details

Corporate Headquarters

Helmholtzstraße 31-37, 41747 Viersen, Germany

Phone: +49 21 62/37 85 – 0

Fax:+49 21 62/16 230

Contact Form or Email: ea1974@elektroautomatik.com

Line Cards: