Elektro-Automatik - USB to Analog UTA12 Interface
Product Overview:
- 
USB Digital-to-Analog conversion
 - 
Resolution: min. 12 Bit
 - 
Simple installation, USB plug ’n play
 - 
No external supply voltage required
 - 
For older EA series with analog interface
 - 
Also for power supplies from other manufacturers
 - 
Status signals monitorable
 - 
2 channels each for control & measuring
 - 
Software included
 - 
LabView drivers (VIs)
 - 
Tutorial for programming in other PC languages
 
More Product Information
EA-IF-AB
- Retrofittable, simple installation (plug 'n play)
 - Easy configuration via a setup menu on the device
 - Galvanic isolation up to 2500 V
 
EA-IF-KE4
- Retrofittable, simple installation (plug 'n play)
 - Easy configuration via a setup menu on the device
 - 
		3 way interface with
- Ethernet (LAN)
 - USB
 - Analog
 
 - 
		Compatible to series
- EA-PSI 9000 T
 - EA-EL 9000 T
 - EA-PS 9000 T
 
 
EA-IF-KE5
- Retrofittable, simple installtion (plug 'n play)
 - Easy configuration via a setup menu on the device
 - 
		Three choices to select from
- IF-KE5 USB (1x USB)
 - IF-KE5 USB/LAN (1x USB + 1x Ethernet
 - IF-KE5 USB/ANALOG (1x USB + 1x Analog)
 
 - 
		Compatible to series
- EA-PS 3000 C
 - EA-EL 3000 B
 
 
- 
Online double conversion principle
 - 
DSP microprocessor controlled
 - 
UPS classification VFI-SS-111 by IEC 62040-3
 - 
Pure sine wave output
 - 
Advanced intelligent battery management
 - 
Short-circuit, overload and deep discharge protection
 - 
Fault alerts and status warnings
 - 
Cold start and energy saving features
 - 
Communication port with software
 - 
Compact size and user friendly operation
 - 
Options & accessories
 - 
Additional charging unit
 - 
Various external battery cabinets for extended autonomy
 - 
Pluggable SNMP & dry contact boards
 - 
Three-phase AC supply input*
 
- 
Line interactive principle
 - 
UPS classification VI-SS-222 according IEC 62040-3
 - 
Pure sine wave output for any critical load
 - 
Boost and buck converter with automatic voltage
 - 
Advanced intelligent battery management
 - 
Short recharge time for batteries
 - 
User friendly LCD panel
 - 
Soft start for critical loads
 - 
Short-circuit, overload and deep discharge protection
 - 
Fault alerts and status warnings
 - 
Output voltage displayed on the LCD panel
 - 
Cold start and energy saving features
 - 
Communication port with software
 - 
Compact size and user friendly operation
 
- 
Line interactive principle
 - 
UPS classification VI-SY-333 by IEC 62040-3
 - 
Boost & buck converter with automatic voltage regulation
 - 
Intelligent battery management
 - 
User friendly LCD panel
 - 
Soft start for critical loads
 - 
Short-circuit, overload and deep discharge protection
 - 
Overvoltage / Undervoltage protection
 - 
Input and output voltage displayed on the LCD panel
 - 
Cold start and energy saving features
 - 
Communication port with software
 - 
Telephone / Fax / Modem protection
 - 
Can be used without batteries as AVR
 - 
Compact size and user friendly operation
 
EA Programmable DC Power Supplies
- Autoranging
 - Color Touchscreen
 - IF- Plug’n play interface-slot
 
Space Saving Instruments in Desktop Style (Series PS and PSI)
- Autoranging
 - Color Touchscreen
 - 3-paths on board Interface
 
Space Saving Instruments in Tower style
- Autoranging
 - Colored Touchscreen
 - IF KE Slot
 
- 
Wide input voltage range 90...264 V with active PFC
 - 
High efficiency up to 92%
 - 
Output power ratings: 58 W up to 240 W
 - 
Output voltages: 3.3 V up to 24 V
 - 
Output currents: 2.5 A up to 30 A
 - 
Single, double or triple output
 - 
Power limited, all outputs for full power
 - 
All outputs separately adjustable and regulated
 - 
Overtemperature protection (OT)
 - 
Remote on/off and power fail signal
 - 
Remote sensing
 - 
Options
 - 
Power sharing* between mains outputs
 - 
Without front plate
 
- 
Autoranging
 - 
Color Touchscreen
 - 
Master-Slave-Bus for Parallel Connection
 - 
Two-quadrant expansion
 - 
19″ Full slide-in, 2 height units
 - 
Analog- und USB-Schnittstelle
 
- 
Autoranging
 - 
Color Touchscreen
 - 
IF KE Slot
 
- 
Function generator
 - 
Portable desk device (Desktop Style)
 - 
Optional Interfaces
 - 
USB/Analog/LAN-Ethernet
 
- 
AC wide input range 90-264V
 - 
Flexible input stage for range extension
 - 
Intuitive operation thanks to color TFT touch panel
 
- 
Wide range input 85...264 V AC with active PFC
 - 
Wide range input 120...360 V DC
 - 
Inrush current limiter
 - 
Output powers: 100 W, 150 W, 200 W and 300 W
 - 
Output voltages:
- 
5 V, 7.5 V, 12 V, 13.5 V, 15 V, 24 V, 27.5 V, 48 V, 54 V
 
 - 
 - 
Output currents: 2.1 A up to 60 A
 - 
Output voltage adjustable ±10%
 - 
Overvoltage protection (OVP)
 - 
Overcurrent protection (OCP)
 - 
Overtemperature protection (OTP)
 - 
Extern on/off
 - 
Remote sensing
 - 
Cooling SPI 100 and SPI 150 natural convection
 - 
Cooling SPI 200 and SPI 300 with fan
 - 
EMI EN 61000-6-1, EN 61000-6-3
 
- 
Wide input voltage range 90...264 V with active PFC
 - 
Output powers: 150 W up to 300 W
 - 
Output voltages: 12 V, 24 V, 42 V and 48 V
 - 
Output currents: 5.2 A up to 21 A
 - 
Output voltage adjustable
 - 
Remote sensing input
 - 
Overload- and short-circuit-proof
 - 
Overtemperature protection (OT)
 - 
Desk and wall mounting versions
 - 
Desk units with 4 mm sockets (type T)
 - 
Wall units with screw terminals (type R)
 
Elektro-Automatik
The EA Elektro-Automatik Group is Europe’s leading supplier in the area of power electronics for R & D and industrial application. At the headquarter in Germany in the industrial centre of North Rhine Westphalia more than 200 qualified associates, in a facility of 18000 m², research, develop and manufacture high-tech equipment for laboratory power supply, high power mains adaptors and electronic loads with or without power feedback.
Contact Details
Corporate Headquarters
Helmholtzstraße 31-37, 41747 Viersen, Germany
Phone: +49 21 62/37 85 – 0
Fax:+49 21 62/16 230
Contact Form or Email: ea1974@elektroautomatik.com

