Featured Products
Fluke - T6-1000 Electrical Tester
-
Be safer: Measure voltage to 1000 V ac through the open fork, without test leads.
-
Be faster: No need to open covers or remove wire nuts.
-
Be more efficient: Simultaneously measure voltage and current.
-
Be everywhere: 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm2).
-
Go beyond simple detection. Actually measure ac voltage and current values without test leads.
Fluke - 789 FC ProcessMeter™ and Temperature Kit
Fluke 789 Temperature Kit features:
- Unique new wireless measurement logging capability
- Temperature measurement from -200 °C to 1372 °C using the t3000 FC
- 24 V Loop power supply
- HART mode setting with loop power (adds 250 ohm resistor)
- 100% larger dual display
- 1200 ohm drive capability on mA source
- Enhanced backlight with two brightness settings
- 0% to 100% mA Span Check buttons to toggle between 4 and 20 mA
- Infrared I/O serial port compatible with
- FlukeView® Forms Software Version 2.1
- Externally accessible fuses for easy replacement
These 787 features are also included in the 789:
- DMM designed to meet 1000 volt IEC 1010 CAT III standards
- Precision 1000 V, 440 mA True-RMS digital multimeter
- Frequency measurement to 20 kHz
- Min/Max/Average/Hold/Relative modes
- Diode test and continuity beeper
- Simultaneous mA and% of scale readout
- 20 mA DC current source/loop calibrator/ simulator
- Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
- Externally accessible battery for easy battery changes
Fluke - 289 IMSK Industrial Multimeter Service Kit
-
True-RMS accuracy with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording give you the results you need.
-
Fluke-i400 AC 400A Current Clamp turns the 289 into a clamp meter.
-
Safety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the job.
Fluke - Compact PTi120 Pocket Thermal Camera
- Automatically organize and file thermal images with Fluke Connect Asset Tagging
- Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
- 3.5” LCD touchscreen display for easy troubleshooting
- -20 °C to +150 °C temperature measurement range
- Six color palettes
- Can withstand drop up to 1 meter
- IP 54 enclosure rating
- Subject to Export Control
Fluke - 376 FC True-RMS Clamp Meter plus insulated hand tools starter kit
-
Fluke 376 FC True-RMS Clamp Meter
-
3 slotted insulated screwdrivers
-
2 Phillips insulated screwdrivers
-
3 insulated pliers
-
Insulated tools certified to 1000 V ac, 1500 V dc
-
Roll-up tool pouch
Fluke - ii900 Sonic Industrial Imager
-
Do more with the same air compressors–delay the capital expense of installing an additional compressor
-
Ensure proper air pressure to your pneumatic equipment
-
Lower energy costs
-
Reduce leak detection time
-
Improve reliability in your production line
-
Make leak detection part of your typical maintenance routine
-
Train the team in a matter of minutes
-
Validate repairs on the spot
Fluke - 87V MAX True-rms Digital Multimeter
-
Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster
-
Waterproof, dustproof IP67 case for the most extreme work sites
-
Premium TL175 TwistGuard™ test leads
-
Double the battery life of the 87V (up to 800 hours); backlit keys for dark environments
