Products

Displaying 1 - 25 of 27

Fluke - 323 True RMS Clamp Meter

  • Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A
  • Measures AC current to 400 A
  • Measures AC voltage and DC voltage to 600 V
  • Provides True RMS AC voltage and current for accurate measurements on non-linear signals
  • Measures resistance to 4 kΩ with continuity detection

Fluke - 324 True-RMS Clamp Meter with Temperature & Capacitance

  • Rugged, reliable basic True-RMS clamp meter
  • Measure AC current up to 400 A, AC/DC voltage to 600V
  • Measure resistance up to 4kΩ, continuity detection ≤ 30Ω
  • Additions from 323 Clamp: Temperature, Capacitance, Backlight

Fluke - 325 True RMS Clamp Meter

  • Rugged, reliable True-RMS clamp meter with dc current and frequency measurements
  • Measures AC and DC current to 400 A
  • Measures AC voltage and DC voltage to 600 V
  • Provides True RMS AC voltage and current for accurate measurements on non-linear signals
  • Measures resistance to 40 kΩ with continuity detection
  • Measures frequency to 500 Hz

Fluke - 345 Power Quality Clamp Meter - Electronic Power Meter

  • Combines the functions of a power analyzer, power quality logger, scope, data logger, and clamp meter in one handy tool
  • Measures AC current to 1400 A RMS and DC current to 2000 A without breaking the circuit
  • Carries the highest safety rating: 600 V CAT IV rated for use at the service entrance

Fluke - 353 True RMS 2000 A Clamp Meter

  • Reliably handle a wide range of high-current applications with 2000 A AC + DC true-rms, 1400 A ac, and 2000 A DC
  • The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
  • CAT IV 600 V, CAT III 1000 V rating for added user protection
  • In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
  • Accurately measure frequency up to 1 kHz for optimum troubleshooting
  • Quickly analyze readings using the MIN, MAX, and AVG functions
  • A large backlit display allows for easy visibility in low-lit areas
  • Use the display hold feature to capture readings even when the display cannot be viewed
  • Use the low-pass filter to smooth out noisy loads and stabilize readings

Fluke - 355 True RMS 2000 A Clamp Meter

  • Reliably handle a wide range of high-current applications with 2000 A AC + DC True RMS, 1400 A AC, and 2000 A DC
  • The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
  • CAT IV 600 V, CAT III 1000 V rating for added user protection
  • In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
  • High voltage measurement of 1000 V AC + DC True RMS, 600 V AC, and 1000 V DC allows the user to perform multiple tests with only one tool
  • Resistance to 400K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter.
  • Accurately measure frequency up to 1 kHz for optimum troubleshooting
  • Quickly analyze readings using the MIN, MAX, and AVG functions
  • A large backlit display allows for easy visibility in low-lit areas
  • Use the display hold feature to capture readings even when the display cannot be viewed
  • Use the low-pass filter to smooth out noisy loads and stabilize readings

Fluke - 365 Detachable Jaw True RMS AC/DC Clamp Meter

  • 200 A AC and DC current measurement with detachable jaw
  • 600 VAC and DC voltage measurement
  • Detachable jaw makes accessing wires and viewing the display easier
  • Built in flashlight/torch allows for easy illumination and identification of wires
  • CAT III 600 V
  • Compact design fits in your hand and can be used while wearing protective equipment
  • State of the art signal processing allows for use in noisy electrical environments while providing stable readings
  • Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
  • Three-year warranty
  • Soft carrying case

Fluke - 368 FC Leakage Current Clamp Meter

  • True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
  • 40 mm jaw opening
  • Highest resolution of 1 μA, measure up to 60 A
  • Selectable filter function removes unwanted noise
  • Max/Min/Average readings and hold function
  • Forward-facing LED worklight for use in dark wiring cabinets
  • Backlit display; auto backlight off and auto power off for extended battery life
  • CAT III 600V safety rating
  • Internal Memory Logging: up to 65,000 measurement points

Fluke - 369 FC Leakage Current Clamp Meter

  • True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
  • 61 mm jaw opening
  • Highest resolution of 1 μA, measure up to 60 A
  • Selectable filter function removes unwanted noise
  • Max/Min/Average readings and hold function
  • Forward-facing LED worklight for use in dark wiring cabinets
  • Backlit display; auto backlight off and auto power off for extended battery life
  • CAT III 600V safety rating

Fluke - 373 True-RMS AC Clamp Meter

  • A top performing True-RMS current clamp for AC-only current measurements to 600 A
  • Measures AC and DC voltage to 600 V
  • Measures resistance to 6000 Ω with continuity detection
  • Offers state of the art signal processing to provide stable readings even in noisy electrical environments

Fluke - 374 FC True-RMS AC/DC Clamp Meter

  • Advanced clamp meter that transmits measurements to your smartphone via Fluke Connect® for viewing at a safer distance
  • Performs AC and DC current measurements to 600 A, and AC and DC voltage measurements to 1000 V
  • Measures AC current to 2500 A AC with optional iFlex flexible current probe
  • Measures resistance to 6000 Ω with continuity detection

Fluke - 375 FC True-RMS AC/DC Clamp Meter

  • High performance clamp meter that measures very low voltage and high resistance
  • Transmits measurements to your smartphone via Fluke Connect® so you can view them at a safer distance
  • Measures AC and DC current to 600 A, and AC and DC voltage to 1000 V
  • Measures AC current to 2500 A AC with optional iFlex flexible current probe

Fluke - 376 FC True-RMS AC/DC Clamp Meter with iFlex

  • Remotely log, trend and monitor measurements to pinpoint intermittent faults via Fluke Connect®
  • Inrush measurement to filter out noise and capture motor starting current
  • Measures AC/DC current to 1000A and AC current to 2500 A with iFlex current probe
  • Integrated VFD low pass filter for accurate motor drive measurements

Fluke - 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®

  • Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy
  • The removable magnetic display can be conveniently mounted where it is easily seen
  • iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
  • CAT IV 600 V, CAT III 1000 V
  • Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings
  • Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
  • Ergonomic design fits in your hand and can be used while wearing protective equipment
  • Radio transmitter automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
  • Three-year warranty
  • Soft carrying case
Safety Conformance
IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV

Fluke - 771 Milliamp Process Clamp Meter

  • Loop calibrator that measures 4 to 20 mA signals without breaking the loop
  • Features best in class 0.2% accuracy
  • Delivers 0.01 mA resolution and sensitivity
  • Measures mA signals for PLC and control system analog I/O
  • Features a detachable clamp with extension cable for measurements in tight locations

Fluke - 772 Milliamp Process Clamp Meter

  • Loop calibrator that measures 4 to 20 mA signals without breaking the loop
  • Features best in class 0.2% accuracy
  • Simultaneously measures the mA signal with the clamp and sources a mA signal
  • Delivers 0.01 mA resolution and sensitivity
  • Measures mA signals for PLC and control system analog I/O

Fluke - 773 Milliamp Process Clamp Meter

  • Loop calibrator that measures 4 to 20 mA signals without breaking the loop
  • Features best in class 0.2% accuracy
  • Sources 4 to 20 mA signals for testing control system I/O or I/Ps
  • Delivers 0.01 mA resolution and sensitivity
  • Measures DC voltage to verify 24V power supplies or voltage I/O signals

Fluke - 902 FC True-RMS HVAC Clamp Meter

  • A wireless Fluke Connect®-enabled clamp meter designed specifically for the needs of HVAC technicians
  • Offers 200 µA DC current measurements to measure flame rod
  • Extends resistance range to measure thermistors up to 60kΩ
  • Captures flue gas temperature
  • Measures start and run motor capacitors
  • Measures variable frequency drive performance

Fluke - a3000 FC Wireless AC Current Clamp Module

The Fluke a3000 FC Wireless AC Current Clamp Module is a fully functional true-RMS current clamp meter that wirelessly relays measurements to other Fluke Connect® enabled master units, listed below:
  • Fluke 3000 FC DMM
  • Fluke Ti200/300/400 Infrared Camera
  • PC via optional pc3000 FC Adapter
  • Fluke Connect Mobile app
The Fluke a3000 FC Wireless AC Current Clamp Module has all the essentials for convenient test and measurement troubleshooting:
  • True-RMS AC clamp meter
  • Measure up to 400 A AC
  • Use as a standalone meter or as part of the system
  • Logging function for recording and saving up to 65,000 readings
  • Inrush function

Fluke - a3001 FC Wireless iFlex® AC Current Module

The Fluke a3001 FC Wireless iFlex AC Current Module is a fully functional true-RMS current meter that wirelessly relays measurements to other Fluke Connect® enabled master units, listed below:
  • Fluke 3000 FC DMM
  • Fluke Ti200/300/400Thermal Camera
  • PC via optional pc3000 FC Adapter
  • Fluke Connect Mobile app
The iFlex® Wireless Current Module allows you to measure around awkward sized conductors or get into tight spaces and makes wire access easier:
  • Measure up to 2500 A AC
  • Use as a standalone meter or as part of the system
  • Logging function for recording and saving up to 65,000 readings
  • Inrush function
  • Magnetic hanging strap

Fluke - a3002 FC Wireless AC/DC Current Module

The Fluke a3002 FC Wireless AC/DC Current Clamp Module is designed to be used with the i410 or i1010 AC/DC current clamps (not included with module). The a3002 FC AC/DC current module wirelessly relays measurements to other Fluke Connect® enabled master units, listed below:

  • Fluke 3000 FC DMM
  • Fluke Ti200/300/400Thermal Camera
  • PC via optional pc3000 FC Adapter
  • Fluke Connect Mobile app

The Fluke a3002 FC main features include:

  • Measure up to 400 AAC or 400 ADC with i410 (sold separately)
  • Measure up to 600 AAC or 1000 ADC with i1010 (sold separately)
  • Use as a standalone meter or as part of the system
  • Logging function for recording and saving up to 65,000 readings

Fluke - a3003 FC Wireless 2000 A DC Current Clamp Meter

The a3003 FC Wireless DC Current Clamp Meter is a fully functional current clamp meter that wirelessly relays measurements to other Fluke Connect® enabled master units, listed below:
  • Fluke 3000 FC Digital Multimeter
  • Fluke Ti200/300/400 Infrared Camera
  • PC via optional pc3000 FC Adapter
  • Fluke Connect Mobile app
  • TiX560 and TiX520
The a3003 FC Wireless 2000 A DC Current Clamp, with its extra-wide jaw, easily clamps around large conductors, typically found in mining, utility, marine, rail or other heavy manufacturing industries where large DC currents or large current carrying cables are found.
The Fluke a3003 FC main features include:
  • Measures from 10 A to 2000 A DC
  • Large jaw size (64 mm) for measuring large, high current conductors
  • Use the logging function for the recording and saving up to 65,000 measurements
  • Includes magnetic hanging strap

Fluke - a3004 FC Wireless 4-20 mA DC Clamp Meter

Fluke a3004 FC Wireless 4-20mA DC Clamp Meter is a fully functional current clamp meter that wirelessly relays measurements to other Fluke Connect® enabled master units, listed below:
  • Fluke 3000 FC DMM
  • Fluke Ti200/300/400 Infrared Camera
  • PC via optional pc3000 FC Adapter
  • Fluke Connect Mobile app
  • TiX560 and TiX520
Fluke a3004 FC Wireless 4-20 mA DC Clamp Meter main features include:
  • Measure 4 to 20 mA signals without "breaking the loop"
  • Detachable clamp with extension cable for measurements in tight locations
  • Use as a standalone meter or as part of the system
  • Use the logging function for the recording and saving up to 65,000 measurements

Fluke - T5-1000 Voltage, Continuity and Current Tester

  • Automatically measure AC and DC voltage up to 1000 V with precise digital resolution
  • Measure current up to 100 A without breaking the circuit with OpenJaw™ design
  • Troubleshoot resistance problems up to 1000 Ω
  • Work in tight spaces with detachable Slim Reach probe tips

Fluke - T5-600 Voltage, Continuity and Current Tester

  • Automatically measure AC and DC voltage up to 600 V with precise digital resolution
  • Measure current up to 100 A without breaking the circuit with OpenJaw™ design
  • Troubleshoot resistance problems up to 1000 Ω
  • Work in tight spaces with detachable Slim Reach probe tips

Pages