Fluke Networks - MT-8200-49A MicroMapper™ Wiremap Tester

Product Overview:

  • Cable tester verifies wiremaps and identifies faults with LEDs
  • MicroMapper™ MT-8200-49A, remote, and patch cable
  • Remote unit enables 1-person testing of installed cables
  • Two tones for tracing hidden cables
  • Test twister pair cables for open circuits, shorts, crossed pairs

More

The MicroMapper™ MT-8200-49A is a hand-held cable tester that makes it easy to verify the integrity of Ethernet twisted pair cables. Test for opens, shorts, reversed, crossed, and split pairs and scan for any existing faults in your cable. Trace cables hidden in ceilings, walls, floors, and bundles.

Fluke Networks MT-8200-49A MicroMapper™ Wiremap Tester

Includes:

  • MicroMapper™ and MicroMapper™ Remote
  • Patch cable
  • (4) 1.5 Volt AAA Alkaline battery
  • User guide
Specifications
Dimensions 4.93 x 2.05 x 1.18 ft (125 x 52 x 30 m)
Weight 0.28 lbs (130 g)
Minimum length for split pair detection is 2 ft (0.6m)
Testing twisted pair cables over 656 ft (200 m) in length
Battery (4) 1.5 Volt AAA Alkaline battery; low battery indication by LED

More Product Information

  • Detects IntelliTone™ digital signals on active networks
  • Includes: IntelliTone™ Pro 200 probe, RJ11 and RJ 45 patch cables, 9-V battery
  • Identifies signals audibly and with 8 LEDs
  • LED shows battery strength at power up and confirms signals
  • Turns off automatically after 1 hour of inactivity

  • Verifies and troubleshoots copper cabling, service and continuity
  • Kit includes IntelliTone™ Pro 200 Toner, adapters, patch cables, test leads
  • SmartTone analog signals for locating cabling on active networks
  • Four distinct cadences for isolating individual wire pairs
  • Supports VDV cable types inc. RJ45/11, coax, bare wire

  • Locates cables safely and effectively on active networks
  • Kit includes IntelliTone™ toner, probe, adapters, patch cables, and test leads
  • Verifies twisted pair installation with end to end continuity test
  • IntelliTone™ digital toning eliminates noise and false signals
  • SmartTone analog toning isolates individual wire pairs

Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP)
  • Works on live networks to provide Ethernet switch detection and device configuration
  • Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video
  • Advanced troubleshooting diagnostics; insertion loss, cross talk, noise issues
  • Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
  • Tests all copper cabling media: twisted-pair, coax, and audio
  • Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe (included with CIQ-KIT)
  • Qualifies and troubleshoots Industrial Ethernet cabling

  • Revolutionary Interface - Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
  • Multimedia Support – tests all common media types including RJ11, RJ45, Coax, with no need for adapters
  • IntelliTone Toning – trace virtually any cable or wire pair with IntelliTone digital and analog toning (Sold separately or included in MS2-KIT)
  • VDV Service Detection – verifies today's media services, including 10/100/1000 Ethernet, POTS, & PoE
  • Rugged Housing - Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs
  • Oversized Display - Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet

  • Save time by locating faults in 2 or 4 pair cables running EtherNet/IP, PROFINET, MODBUS and other ethernet protocols in 4 seconds
  • Diagnoses of the most common faults displayed on the large backlit screen
  • Identify exactly where the fault is in meter or feet
  • Find unmarked cables with built in tone generator (Probe included with MS-POE-KIT model)

  • Copper cable certifier for TIA category 5 through 6A, twisted-pair cabling with touchscreen project management, TIA Level IIIe accuracy, advanced troubleshooting, 8-hour battery life
  • Startup Faster & Prevent Downtime - Validate at the Machine Builder and again when commissioning the machine at the Plant and find marginal cables before they become a problem
  • Speed Troubleshooting - Avoid wasting time installing unnecessary bypass cables
  • Pass/Fail indication in 10 seconds with full measurement details
  • Supports RJ45 and M12D and M12X connectors
  • Works on cables running EtherNet/IP™, Profnet™ , ModBus TCP™ , EtherCAT and other protocols
  • Validate Cable Performance to Standards for Industrial Premises (TIA 1005-A, ISO 11801:3) Document test results with LinkWare software

  • MPO and single strand fiber inspection camera with instant Live View
  • Kit includes FI-3000 FiberInspector Ultra camera, tip set, adapter, holster and case
  • Autofocus/Auto centering multi-camera design and automated pass/fail
  • Total MPO visibility with Live View from full trunk to individual end face
  • For single strand and 1 or 2 rows of 8/12/16 UPC or APC connectors

  • MPO and single strand fiber inspection camera with instant Live View
  • Includes FI-3000 FiberInspector Ultra camera, Versiv main/remote, and accessories
  • Autofocus/Auto centering multi-camera design and automated pass/fail
  • Total MPO visibility from full trunk to individual end face
  • For single strand fiber and 1 or 2 rows of 8/12/16 UPC or APC connectors

Fluke Corporation

Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.

From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, metrologists, medical-device manufacturers, and computer network professionals — people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.

Fluke has achieved the number one or number two position in every market in which it competes. The Fluke brand has a reputation for portability, ruggedness, safety, ease of use and rigid standards of quality.

Contact Details

Fluke Corporation Headquarters

6920 Seaway Blvd., Everett, WA 98203

Mailing address: PO Box 9090, Everett, Washington 98206-9090

Phone: 1-425-347-6100

Technical Support Email: fluke-info@fluke.com


Thermal Imaging
IR Windows Thermal cameras