Fluke Networks - MicroScanner™ PoE Cable Verifier

Product Overview:

  • Save time by locating faults in 2 or 4 pair cables running EtherNet/IP, PROFINET, MODBUS and other ethernet protocols in 4 seconds
  • Diagnoses of the most common faults displayed on the large backlit screen
  • Identify exactly where the fault is in meter or feet
  • Find unmarked cables with built in tone generator (Probe included with MS-POE-KIT model)

More

MicroScanner™ PoE finds common errors and switch power capacity. Cables often fail in harsh industrial environments where cables are exposed to vibration, extreme flexing, moisture, expansion and contraction from temperature change. Failures result in costly production downtime so it’s important to quickly identify where the cable is broken so it can be replaced or repaired. MicroScanner™ PoE performs continuity tests on all wires in a few seconds and displays results graphically so you can see opens, shorts, and cross wires. It also reports which end of the cable has a problem and reports the distance to an open connection within the cable.

The MicroScanner™ PoE also allows for easy installation/maintenance on IT, Security, PoE lighting, Ethernet based HVAC devices and IP based Building Automation systems. Troubleshoot quickly and easily with the oversized backlit LCD screen that displays clear results in bright light or complete dark with intuitive icons, and support of Class 1 to 8 PoE.

MicroScanner™ POE (Power Over Ethernet)
Includes:
  • MicroScanner™ POE (Power over Ethernet) cable verifier with detachable wiremap adapter
  • Getting started guide (10 languages)
  • 2 AA alkaline batteries
  • Carry pouch
  • One year warranty

Specifications apply at 23 °C (73 °F), unless otherwise noted.

Environmental specifications
Operating temperature 32 °F to 113 °F (0 °C to 45 °C)
Storage temperature -4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity (% RH without condensation) 90 % (50 °F to 95 °F 10 °C to 35 °C)
75 % (95 °F to 113 °F 35 °C to 45 °C)
Shock and Vibration Random, 2 g, 5 Hz-500 Hz (Class 2)
1 m drop test with and without wiremap adapter attached
Safety IEC 61010-1 3rd Edition
Altitude 4,000 m; Storage: 12,000 m
EMC IEC 61326-1
General specifications
Test connectors Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. 
Power Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use
Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
Dimensions and weight (with batteries installed and wiremap adapter attached) 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)
MicroScanner™ PoE: 10.6 oz (300 g)
Display Monochrome LCD with backlight
Test modes
Cable test Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner™ PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.
Tone Generates Intellitone™ and normal analog toning signals
PoE MicroScanner™ PoE: Solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco’s Universal Power over Ethernet) compatible PoE devices
Performance specifications
Cable types tested Twisted pair: UTP, FTP, SSTP
Length test Range: 460 m (1500 ft)
Resolution: 0.3 m (1 ft)
Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.
Calibration: User-settable NVP for twisted pair and coax (MicroScanner™2). Can determine actual NVP with known length of cable.
Wiremap test Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
Ethernet port detection MicroScanner™ PoE: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps.
Tone generator Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.

More Product Information

  • Revolutionary Interface - Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
  • Multimedia Support – tests all common media types including RJ11, RJ45, Coax, with no need for adapters
  • IntelliTone Toning – trace virtually any cable or wire pair with IntelliTone digital and analog toning (Sold separately or included in MS2-KIT)
  • VDV Service Detection – verifies today's media services, including 10/100/1000 Ethernet, POTS, & PoE
  • Rugged Housing - Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs
  • Oversized Display - Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet

  • Detects IntelliTone™ digital signals on active networks
  • Includes: IntelliTone™ Pro 200 probe, RJ11 and RJ 45 patch cables, 9-V battery
  • Identifies signals audibly and with 8 LEDs
  • LED shows battery strength at power up and confirms signals
  • Turns off automatically after 1 hour of inactivity

Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP)
  • Works on live networks to provide Ethernet switch detection and device configuration
  • Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video
  • Advanced troubleshooting diagnostics; insertion loss, cross talk, noise issues
  • Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
  • Tests all copper cabling media: twisted-pair, coax, and audio
  • Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe (included with CIQ-KIT)
  • Qualifies and troubleshoots Industrial Ethernet cabling

  • Copper cable certifier for TIA category 5 through 6A, twisted-pair cabling with touchscreen project management, TIA Level IIIe accuracy, advanced troubleshooting, 8-hour battery life
  • Startup Faster & Prevent Downtime - Validate at the Machine Builder and again when commissioning the machine at the Plant and find marginal cables before they become a problem
  • Speed Troubleshooting - Avoid wasting time installing unnecessary bypass cables
  • Pass/Fail indication in 10 seconds with full measurement details
  • Supports RJ45 and M12D and M12X connectors
  • Works on cables running EtherNet/IP™, Profnet™ , ModBus TCP™ , EtherCAT and other protocols
  • Validate Cable Performance to Standards for Industrial Premises (TIA 1005-A, ISO 11801:3) Document test results with LinkWare software

  • MPO and single strand fiber inspection camera with instant Live View
  • Kit includes FI-3000 FiberInspector Ultra camera, tip set, adapter, holster and case
  • Autofocus/Auto centering multi-camera design and automated pass/fail
  • Total MPO visibility with Live View from full trunk to individual end face
  • For single strand and 1 or 2 rows of 8/12/16 UPC or APC connectors

  • Cable tester verifies wiremaps and identifies faults with LEDs
  • MicroMapper™ MT-8200-49A, remote, and patch cable
  • Remote unit enables 1-person testing of installed cables
  • Two tones for tracing hidden cables
  • Test twister pair cables for open circuits, shorts, crossed pairs

  • Verifies and troubleshoots copper cabling, service and continuity
  • Kit includes IntelliTone™ Pro 200 Toner, adapters, patch cables, test leads
  • SmartTone analog signals for locating cabling on active networks
  • Four distinct cadences for isolating individual wire pairs
  • Supports VDV cable types inc. RJ45/11, coax, bare wire

  • Locates cables safely and effectively on active networks
  • Kit includes IntelliTone™ toner, probe, adapters, patch cables, and test leads
  • Verifies twisted pair installation with end to end continuity test
  • IntelliTone™ digital toning eliminates noise and false signals
  • SmartTone analog toning isolates individual wire pairs

  • MPO and single strand fiber inspection camera with instant Live View
  • Includes FI-3000 FiberInspector Ultra camera, Versiv main/remote, and accessories
  • Autofocus/Auto centering multi-camera design and automated pass/fail
  • Total MPO visibility from full trunk to individual end face
  • For single strand fiber and 1 or 2 rows of 8/12/16 UPC or APC connectors

Fluke Corporation

Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.

From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, metrologists, medical-device manufacturers, and computer network professionals — people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.

Fluke has achieved the number one or number two position in every market in which it competes. The Fluke brand has a reputation for portability, ruggedness, safety, ease of use and rigid standards of quality.

Contact Details

Fluke Corporation Headquarters

6920 Seaway Blvd., Everett, WA 98203

Mailing address: PO Box 9090, Everett, Washington 98206-9090

Phone: 1-425-347-6100

Technical Support Email: fluke-info@fluke.com


Thermal Imaging
IR Windows Thermal cameras