Fluke Networks - CableIQ™ Qualification Tester
Product Overview:
Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP)
-
Works on live networks to provide Ethernet switch detection and device configuration
-
Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video
-
Advanced troubleshooting diagnostics; insertion loss, cross talk, noise issues
-
Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
-
Tests all copper cabling media: twisted-pair, coax, and audio
-
Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe (included with CIQ-KIT)
-
Qualifies and troubleshoots Industrial Ethernet cabling
CableIQ Qualification Tester
Includes:
- CableIQ with remote adapter
- CableIQ Reporter software CD
- (2) RJ45-RJ45 patch cord
- USB cable
- Coax 'F' push-on adapter
- Owner's CD and quick start guide
- (4) AA batteries
- Soft carry case
| Specifications | |
| Cable types supported | UTP, STP, FTP, SSTP, RG6, RG59, audio and security |
| Qualification autotests | 1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax |
| Supported tests | Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection. |
| Wiremap | Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs. |
| Find fault | Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application |
| Results storage | Up to 250 qualification test results |
| Power | Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries |
| Battery life | 20 hours of typical use, without backlight |
| Other battery types supported | 4AA photo lithium, NIHM, NICAD |
| Dimensions and weight | 7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg) |
More Product Information
-
Cable tester verifies wiremaps and identifies faults with LEDs
-
MicroMapper™ MT-8200-49A, remote, and patch cable
-
Remote unit enables 1-person testing of installed cables
-
Two tones for tracing hidden cables
-
Test twister pair cables for open circuits, shorts, crossed pairs
-
Detects IntelliTone™ digital signals on active networks
-
Includes: IntelliTone™ Pro 200 probe, RJ11 and RJ 45 patch cables, 9-V battery
-
Identifies signals audibly and with 8 LEDs
-
LED shows battery strength at power up and confirms signals
-
Turns off automatically after 1 hour of inactivity
-
Revolutionary Interface - Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
-
Multimedia Support – tests all common media types including RJ11, RJ45, Coax, with no need for adapters
-
IntelliTone Toning – trace virtually any cable or wire pair with IntelliTone digital and analog toning (Sold separately or included in MS2-KIT)
-
VDV Service Detection – verifies today's media services, including 10/100/1000 Ethernet, POTS, & PoE
-
Rugged Housing - Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs
-
Oversized Display - Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet
-
Save time by locating faults in 2 or 4 pair cables running EtherNet/IP, PROFINET, MODBUS and other ethernet protocols in 4 seconds
-
Diagnoses of the most common faults displayed on the large backlit screen
-
Identify exactly where the fault is in meter or feet
-
Find unmarked cables with built in tone generator (Probe included with MS-POE-KIT model)
-
Copper cable certifier for TIA category 5 through 6A, twisted-pair cabling with touchscreen project management, TIA Level IIIe accuracy, advanced troubleshooting, 8-hour battery life
-
Startup Faster & Prevent Downtime - Validate at the Machine Builder and again when commissioning the machine at the Plant and find marginal cables before they become a problem
-
Speed Troubleshooting - Avoid wasting time installing unnecessary bypass cables
-
Pass/Fail indication in 10 seconds with full measurement details
-
Supports RJ45 and M12D and M12X connectors
-
Works on cables running EtherNet/IP™, Profnet™ , ModBus TCP™ , EtherCAT and other protocols
-
Validate Cable Performance to Standards for Industrial Premises (TIA 1005-A, ISO 11801:3) Document test results with LinkWare software
-
MPO and single strand fiber inspection camera with instant Live View
-
Kit includes FI-3000 FiberInspector Ultra camera, tip set, adapter, holster and case
-
Autofocus/Auto centering multi-camera design and automated pass/fail
-
Total MPO visibility with Live View from full trunk to individual end face
-
For single strand and 1 or 2 rows of 8/12/16 UPC or APC connectors
-
Verifies and troubleshoots copper cabling, service and continuity
-
Kit includes IntelliTone™ Pro 200 Toner, adapters, patch cables, test leads
-
SmartTone analog signals for locating cabling on active networks
-
Four distinct cadences for isolating individual wire pairs
-
Supports VDV cable types inc. RJ45/11, coax, bare wire
-
Locates cables safely and effectively on active networks
-
Kit includes IntelliTone™ toner, probe, adapters, patch cables, and test leads
-
Verifies twisted pair installation with end to end continuity test
-
IntelliTone™ digital toning eliminates noise and false signals
-
SmartTone analog toning isolates individual wire pairs
-
MPO and single strand fiber inspection camera with instant Live View
-
Includes FI-3000 FiberInspector Ultra camera, Versiv main/remote, and accessories
-
Autofocus/Auto centering multi-camera design and automated pass/fail
-
Total MPO visibility from full trunk to individual end face
-
For single strand fiber and 1 or 2 rows of 8/12/16 UPC or APC connectors
Fluke Corporation
Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.
From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, metrologists, medical-device manufacturers, and computer network professionals — people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.
Fluke has achieved the number one or number two position in every market in which it competes. The Fluke brand has a reputation for portability, ruggedness, safety, ease of use and rigid standards of quality.
Contact Details
Fluke Corporation Headquarters
6920 Seaway Blvd., Everett, WA 98203
Mailing address: PO Box 9090, Everett, Washington 98206-9090
Phone: 1-425-347-6100
Technical Support Email: fluke-info@fluke.com
| Building infrastructure | |
| HVAC tools | Indoor air quality testing |
| Laser distance meters | Laser levels |
| Wire tracers | |
| Condition monitoring | |
| Power monitoring | Vibration monitoring |
| Connected reliability | |
| Suite for Maximo |
| Mechanical maintenance | |
| Laser alignment | Vibration analysis |
| Network cable testers | |
| Copper testers | Fiber optic testers |
| Industrial ethernet testers | |
| Precision measurement | |
| Bench instruments | Data acquisition |
| Temperature measurement | |
| Contact thermometers | IR thermometers |
| Thermal Imaging | |
| IR Windows | Thermal cameras |
Line Cards:
