Fluke - Insulated Phillips screwdriver

Product Overview:

  • Ergonomic handle that adapts to user’s hand, causes less strain and work fatigue and provides maximum torque.
  • Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design.
  • Slim insulated shaft allows access in hard to reach areas.
  • Certified to 1000 V ac, 1500 V dc
  • Two sizes (Phillips #1 and Phillips #2), sold individually, also in kits

More

The job isn’t finished until everything is tightened down. Precision insulated Phillips head screwdrivers fit and grip the fastener properly to apply maximum torque without damage to the head. Hardened chromium-molybdenum-vanadium (CMV) steel blades minimize wear. The last thing you want is to have your driver slip out of the screw head and possibly contact a nearby live conductor.

Fluke offers two sizes of Phillips screwdrivers (Phillips #1 and Phillips #2), sold individually, also in kits. Both certified to 1000 volts AC and 1500V DC. Forged from German CMV steel for superior durability. Every screwdriver individually tested to 10,000 volts and back by a limited lifetime warranty.

IPHS1

Insulated Phillips Screwdriver #1, 3"


IPHS2

Insulated Phillips Screwdriver #2, 4"

Screwdriver Type Blade length
(inches
mm)
Handle length
(inches
mm)
Handle width
(inches
mm)
Bladeform diameter
(inches
mm)
Head PhillipsPhillip #1s 3
80
3-11/16
94
1 3/16
30
7/32
5
Head PhillipsPhillip #2 4
100
4-3/16
106
1 7/16
36
1/4
6

Warranty

Fluke Insulated Hand Tool Lifetime Limited Warranty

Each Fluke Insulated Hand Tool will be free from defects in material and workmanship for its lifetime. As used herein, “lifetime” is defined as seven years after Fluke discontinues manufacturing the product, but the warranty period shall be at least fifteen years from the date of purchase. This warranty does not cover damage from neglect, misuse, contamination, alteration, accident or abnormal conditions of operation or handling, damage or normal wear and tear of mechanical components. This warranty covers the original purchaser only and is not transferable.

Recommendations for use and in-service care of Fluke Insulated Hand Tools

The following is guidance concerning the maintenance, inspection, retest and use of Fluke Insulated Hand Tools.

Warning – to avoid electrical shock or personal injury:

  • Keep fingers behind the finger guards of the tool. Never touch conductive parts.
  • Always wear approved eye protection.
  • Do not use in wet or damp locations. Do not use unless the tool is clean and dry.
  • Do not apply excessive force or stress to the tool insulation that may cause damage. Examples include using the insulated surfaces as a fulcrum to pry or wedge or gripping insulated tool handles with other tools such as pliers or wrenches to increase torque or leverage.

If the tool is used in a manner not specified, the protection may be impaired.

Storage

Insulated hand tools should be properly stored to minimize the risk of damage to the insulation due to storage or transportation. These insulated hand tools should be stored separated from other tools to avoid mechanical damage or confusion with uninsulated tools. Furthermore, these insulated hand tools should be prevented from contact with excessively hot surfaces (for example steam pipes) or exposure to excessive UV- radiation.

Inspection before use

Before use, each Insulated Hand Tool should be visually inspected by the user. If there is any doubt concerning the safety of the insulated hand tool, it should be subjected to examination by a competent person and if necessary retested to determine suitability or disposed of to prevent further use.

Temperature

Insulated Hand Tools should be used only in environments having temperatures between –20 °C and +70 °C and, for tools marked “C”, between –40 °C and +70 °C.

Periodic examination and electrical retesting

An annual visual examination by a suitably trained person is recommended to determine the suitability of the Insulated Hand Tool for further service. If an electrical retest is required by national regulation or in the case of doubt after visual examination, the applicable dielectric test of IEC 60900 for insulated hand tools should be performed.

For details contact a Fluke Service Center.

More Product Information

  • Ergonomic handle that adapts to user’s hand, causes less strain and work fatigue and provides maximum torque.
  • Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design.
  • Slim insulated shaft allows access in hard to reach areas.
  • Two sizes (#1 and #2), sold individually, also in kits

  • Ergonomic handle that adapts to user’s hand, causes less strain and work fatigue and provides maximum torque.
  • Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design.
  • Slim insulated shaft allows access in hard to reach areas.
  • Three sizes, sold individually, also in kits.

  • Fast adjust slip joint pliers
  • More gripping strength and comfort compared to conventional pump pliers of the same length
  • 27 jaw adjustment steps for more accurate gripping, less slippage
  • Improved access in tight spaces due to slim head and joint
  • Certified to 1000 V ac, 1500 V dc
  • Self-locking on pipes and nuts
  • Box-joint design; high stability because of double guide
  • Pinch guard prevents operators´ fingers being pinched
  • German chromium-molybdenum-vanadium steel

  • Heavy duty, high leverage 8-inch diagonal cutting pliers
  • Cuts hard materials including steel and piano wire
  • Power joint and precision cutting edges
  • Certified to 1000 V ac, 1500 V dc
  • German chromium-molybdenum-vanadium steel

  • Heavy duty 8 inch 1,000 V rated lineman pliers
  • Secure hold with aggressive side cutting serrated jaws and 4-point gripping hole
  • Slim shape for better access to wires in tight spaces
  • Certified to 1000 V ac, 1500 V dc
  • Powerful gripping jaw, yet 20% lighter weight than other designs
  • Forged from German chromium-molybdenum-vanadium steel

  • Long nose pliers with side cutter and gripping zones
  • Unique milled wave pattern gripping zones
  • 4 gripping points for pulling round objects with superior grip that won't slip
  • Certified to 1000 V ac, 1500 V dc
  • Straight, half-round, long and slim knurled jaws, specially profiled
  • Side cutting edge for wire cutting
  • German chromium-molybdenum-vanadium steel
  • Fluke 376 FC True-RMS Clamp Meter
  • 3 slotted insulated screwdrivers
  • 2 Phillips insulated screwdrivers
  • 3 insulated pliers
  • Insulated tools certified to 1000 V ac, 1500 V dc
  • Roll-up tool pouch

  • Ultimate troubleshooting tool for electricians and instrumentation professionals
  • Combines the functionality of a loop calibrator with the power of a precision 1000 V, 440 mA True-RMS digital multimeter
  • Optional IR3000FC module for wireless data logging capabilities via Fluke Connect® mobile App
  • Includes 24 V loop power supply
  • Features a very large dual display with enhanced two-level backlight brightness settings

The Fluke 975 offers an unparalleled featureset for HVAC and facilities technicians, helping them work more quickly and accurately, with the ease of use and durability customers expect from a Fluke meter.
Simultaneously measures, logs, and displays temperature, humidity, CO2, and CO on a bright, backlit LCD display
  • One-touch air flow and velocity with available probe*
  • Wet bulb and dew point temperature
  • % of outside air calculation
  • CO2 and CO field calibration feature
  • Self-test function at startup
  • Auto-backlight
  • Automatically compensates for barometric pressure changes
  • Min/Max/Average on all measured and calculated readings
  • Multi-language user interface
  • Metric or standard units
  • Audible and visual threshold alarms
  • Extensive discrete or continuous data logging capacity, downloadable to PC via USB interface
  • Keypad lock for security
  • Included FlukeView Forms® software
*Included with Fluke 975V, optional with Fluke 975

Fluke Corporation

Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.

From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, metrologists, medical-device manufacturers, and computer network professionals — people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.

Fluke has achieved the number one or number two position in every market in which it competes. The Fluke brand has a reputation for portability, ruggedness, safety, ease of use and rigid standards of quality.

Contact Details

Fluke Corporation Headquarters

6920 Seaway Blvd., Everett, WA 98203

Mailing address: PO Box 9090, Everett, Washington 98206-9090

Phone: 1-425-347-6100

Technical Support Email: fluke-info@fluke.com


Thermal Imaging
IR Windows Thermal cameras