Fluke Calibration - P3200 Hydraulic Deadweight Tester

Product Overview:

  • Pressure ranges to 10,000 psi (700 bar)
  • 0.015% of reading accuracy standard (0.008% optional)
  • Single or dual piston formats
  • Built-in hand pumps standard
  • Mounted spirit level with adjustable feet
  • Units can be trimmed to local gravity FOC

More

The P3200 models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. This robust instrument is highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.

Options

PressCal software for pressure calculations and certificate generation

Fluke Calibration P3214-1 Hydraulic Deadweight Tester
Pressure Range 20 to 700 bar

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3211-1 Hydraulic Deadweight Tester
Pressure Range 1 to 35 bar

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3211-3 Hydraulic Deadweight Tester
Pressure Range 10 to 500 psi

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3211-2 Hydraulic Deadweight Tester
Pressure Range 1 to 35 kgf/cm²

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3211-4 Hydraulic Deadweight Tester
Pressure Range 100 to 3,500 kPa

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3211-5 Hydraulic Deadweight Tester
Pressure Range 0.1 to 3.5 MPa

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3213-1 Hydraulic Deadweight Tester
Pressure Range 10 to 350 bar

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3213-2 Hydraulic Deadweight Tester
Pressure Range 10 to 350 kgf/cm²

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3213-3 Hydraulic Deadweight Tester
Pressure Range 100 to 5,000 psi

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3213-4 Hydraulic Deadweight Tester
Pressure Range 1,000 to 35,000 kPa

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3213-5 Hydraulic Deadweight Tester
Pressure Range 1 to 35 MPa

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3214-2 Hydraulic Deadweight Tester
Pressure Range 20 to 700 kgf/cm²

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3214-3 Hydraulic Deadweight Tester
Pressure Range 200 to 10,000 psi

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3214-4 Hydraulic Deadweight Tester
Pressure Range 2,000 to 70,000 kPa

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3214-5 Hydraulic Deadweight Tester
Pressure Range 2 to 70 MPa

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU

Fluke Calibration P3223-1 Hydraulic Deadweight Tester
Pressure Range 1 to 350 bar

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU

Fluke Calibration P3223-2 Hydraulic Deadweight Tester
Pressure Range 1 to 350 kgf/cm²

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU

Fluke Calibration P3223-3 Hydraulic Deadweight Tester
Pressure Range 10 to 5,000 psi

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU

Fluke Calibration P3223-4 Hydraulic Deadweight Tester
Pressure Range 100 to 35,000 kPa

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU

Fluke Calibration P3223-5 Hydraulic Deadweight Tester
Pressure Range 0.1 to 35 MPa

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU

Fluke Calibration P3224-1 Hydraulic Deadweight Tester
Pressure Range 1 to 700 bar

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU

Fluke Calibration P3224-2 Hydraulic Deadweight Tester
Pressure Range 1 to 700 kgf/cm²

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU

Fluke Calibration P3224-3 Hydraulic Deadweight Tester
Pressure Range 10 to 10,000 psi

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU

Fluke Calibration P3224-4 Hydraulic Deadweight Tester
Pressure Range 100 to 70,000 kPa

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU

Fluke Calibration P3224-5 Hydraulic Deadweight Tester
Pressure Range 0.1 to 70 MPa

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Pressure Ranges
Distilled water operated Ranges to 10,000 psi (700 bar)
Accuracy
Accuracy1 ±0.015% of reading (±0.008% optional)
1. Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.
Materials of Construction
Standard weight material Series 3 non-magnetic austenitic stainless steel
Weight density 7.8 g/cm³
Optional fractional weights Solution heat treated aluminum
Weight density 2.7 g/cm³
Piston material Tungsten carbide with nickel binder
Density- 15.0 g/cm³
Cylinder material Hardened martensitic steel
Tungsten carbide (water above 500 psi, 35 bar)
Thermal coefficients of expansion Oil piston/cylinder 16.5 ppm/°C
Water (above 500 psi, 35 bar) 11 ppm/°C
General
Test port adaptors 1/8, 1/4, 3/8 and 1/2
NPT or BSP
Instrument weight 36 lbs (16 kg)
Instrument size (W x D x H) 17.5 x 12 x 8.5 in (440 x 300 x 215 mm)
Mass set weight (typical) 80 lbs (36 kg)
Reservoir volume 150 cc
Screw press displacement 5.5 cc
Pump displacement 4.7 cc per stroke
O-ring seal materials Buna N as standard, Viton and EPDM available
Weight Increments
Minimum standard weight increments Up to 500 psi (35 bar): 1 psi (0.1 bar)
500 to 5000 psi (35 to 350 bar): 10 psi (1 bar)
5000 to 20,000 psi (350 to 1400 bar): 20 psi (2 bar)
Model P3112: 1 psi (0.1 bar)
Optional fractional weights Up to 500 psi (35 bar): 0.1 psi (0.01 bar)
500 to 5000 psi (35 to 350 bar): 1 psi (0.1 bar)
5000 to 20,000 psi (350 to 1400 bar): 2 psi (0.2 bar)
Operating Fluids
Operating fluids Distilled or deionized water
Options
PressCal software Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments
Fluids Instruments can be supplied for use with Skydrol or brake fluids. Due to the aggressive nature of these fluids the standard nitrile seals and the acrylic reservoir tube will be replaced by either Viton or EPDM seals (as applicable) and an aluminum reservoir tube. For these or any other specialty fluid applications, please consult the factory.

More Product Information

  • Pressure ranges to 60,000 psi (4000 bar)
  • Select from two accuracy classes; 0.02% or 0.015% of reading
  • Includes hand pump and intensifier for generating high pressures
  • Tungsten carbide piston and cylinder provides long term stability and durability
  • Mass set can be trimmed to local gravity FOC

  • Pressure ranges to 60,000 psi (4000 bar)
  • 0.015% of reading accuracy standard (0.008% optional)
  • Single or dual piston format
  • Built-in hand pumps standard
  • Mounted spirit level with adjustable feet
  • Units can be trimmed to local gravity FOC

All the features you expect in today’s state-of-the-art instruments, including:
Accuracy and performance
  • One-year measurement uncertainty is ± 0.02% of reading from 10% to 100% with one Q-RPT, and from 1% to 100% with two Q-RPTs
  • Low torque variable volume allows for pressure generation up to 200 MPa (30,000 psi) with minimal physical effort
  • Separate fine adjustment tool for maximum, superfine control resolution
  • User defined resolution and ready limits enable user to optimize performance based on DUT specifications
  • High pressure isolation valve and pressure relief valve protect the low pressure reference transducer from over pressure when high pressure reference transducer is active
Ease of use
  • AutoRange feature optimizes measurement and safety features for the specific range of the instrument being calibrated
  • Simple rezeroing while vented at atmospheric pressure
  • Simple, objective pressure “ready/not ready indicator with user adjustable criteria to ensure repeatable results among operators
  • Not dependent on local gravity or ambient temperature
  • Sets and reads any pressure value directly in any unit of measure, without moving weights
  • Built-in priming system to fill system with test fluid and purge unwanted air to assure smooth operation
  • Optional foot switch accessory allows hands-free data collection when running AutoTests
Portability
  • Rechargeable battery pack option for eight hours of field operation
  • Everything to set, adjust and read pressure in one compact, transportable package
  • Optional shipping/carrying case with handles and wheels allows for easy transport to field application
  • Proven rugged and weatherproof design with room for accessories.
Automation
  • RS232 interface allows for real time automated data collection and customized report generation using COMPASS® for Pressure calibration software

A powerful, complete hydraulic pressure calibration system to cover a wide workload
Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include:
  • No weights to load and unload, transport or send out for calibration
  • Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
  • No piston-cylinder changes
  • No significant sensitivity to level or vibration
  • Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
  • Operates in any unit of measure, switching easily from one unit to the next
The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers.

  • Generates pressures to 10,000 psi (700 bar)
  • Bench mounted design
  • Operational with a wide range of fluids
  • Screw press for fine pressure adjustments

  • 0.015% of reading accuracy standard (0.008% optional)
  • 1-30 inHg vacuum (0.03-1 bar vacuum)
  • 3-500 psi (0.2-35 bar) pressure
  • inH2O and mbar ranges available
  • Series 3 non-magnetic stainless steel weights
  • Units can be trimmed to local gravity FOC

  • Calibrate up to four tri-clamp sanitary sensors at the same time
  • Wide temperature ranges cover most process applications:
    • 6109A: 35 °C to 250 °C
    • 7109A: –25 °C to 140 °C
  • Excellent display accuracy of ±0.1 °C provides 4:1 test uncertainty ratio (TUR) for critical applications
  • Easy to transport up stairs and across catwalks
  • Stainless steel casing withstands harsh sterilizing chemicals and is rust proof
  • Easy to use and maintain
  • Global Fluke support and service

  • Detect live voltage even when the batteries are dead
  • 3 forms of AC/DC voltage indication: light, sound, and vibration for added user protection and convenience
  • GFCI Trip for testing GFCI circuits on outlets

  • Detect live voltage even when the batteries are dead
  • 3 forms of AC/DC voltage indication: light, sound, and vibration for added user protection and convenience
  • Backlit LCD display and hold function for easier viewing in hard-to-test areas

Fluke Corporation

Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.

From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, metrologists, medical-device manufacturers, and computer network professionals — people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.

Fluke has achieved the number one or number two position in every market in which it competes. The Fluke brand has a reputation for portability, ruggedness, safety, ease of use and rigid standards of quality.

Contact Details

Fluke Corporation Headquarters

6920 Seaway Blvd., Everett, WA 98203

Mailing address: PO Box 9090, Everett, Washington 98206-9090

Phone: 1-425-347-6100

Technical Support Email: fluke-info@fluke.com


Thermal Imaging
IR Windows Thermal cameras