Products

Displaying 1 - 16 of 16

Elektro-Automatik - Series PS 500 RT Built-in Power Supplies

EA-PS 500 150 W - 300 W
  • Wide input voltage range 90...264 V with active PFC
  • Output powers: 150 W up to 300 W
  • Output voltages: 12 V, 24 V, 42 V and 48 V
  • Output currents: 5.2 A up to 21 A
  • Output voltage adjustable
  • Remote sensing input
  • Overload- and short-circuit-proof
  • Overtemperature protection (OT)
  • Desk and wall mounting versions
  • Desk units with 4 mm sockets (type T)
  • Wall units with screw terminals (type R)

Elektro-Automatik - 19“ 3U Eurocassette Power Supplies

EA-PS 800 19“ 80 W - 240 W
  • Wide input voltage range 90...264 V with active PFC
  • High efficiency up to 92%
  • Output power ratings: 58 W up to 240 W
  • Output voltages: 3.3 V up to 24 V
  • Output currents: 2.5 A up to 30 A
  • Single, double or triple output
  • Power limited, all outputs for full power
  • All outputs separately adjustable and regulated
  • Overtemperature protection (OT)
  • Remote on/off and power fail signal
  • Remote sensing
  • Options
  • Power sharing* between mains outputs
  • Without front plate

Elektro-Automatik - Automatic Battery Chargers - Standard (lead)

EA-BC 500 150 W - 300 W
  • Wide input voltage range 90...264 V with active PFC
  • Output powers: 150 W up to 300 W
  • Battery voltages: 12 V, 24 V or 48 V
  • Charging currents: 5.5 A up to 20.5 A
  • I-U-U charging characteristic
  • Short-circuit and reverse polarity protection
  • Overtemperature protection (OT)
  • Including adaptor for wall mount
  • Safety EN 60950

Elektro-Automatik - Digital Interface Cards for EL/ELR PS/PSI/PSE/PSB 9000 2U-3U

EA-IF-AB

  • Retrofittable, simple installation (plug 'n play)
  • Easy configuration via a setup menu on the device
  • Galvanic isolation up to 2500 V

EA-IF-KE4

  • Retrofittable, simple installation (plug 'n play)
  • Easy configuration via a setup menu on the device
  • 3 way interface with
    • Ethernet (LAN)
    • USB
    • Analog
  • Compatible to series
    • EA-PSI 9000 T
    • EA-EL 9000 T
    • EA-PS 9000 T

EA-IF-KE5

  • Retrofittable, simple installtion (plug 'n play)
  • Easy configuration via a setup menu on the device 
  • Three choices to select from
    • IF-KE5 USB (1x USB)
    • IF-KE5 USB/LAN (1x USB + 1x Ethernet
    • IF-KE5 USB/ANALOG (1x USB + 1x Analog)
  • Compatible to series
    • EA-PS 3000 C
    • EA-EL 3000 B

Elektro-Automatik - EA Programmable DC and Electronic Loads

19 Inch Slide-in Housing (Series EL / Dissipative)
  • Autoranging
  • Color Touchscreen
  • Master-Slave-Bus for Parallel Connection
  • Two-quadrant expansion
  • 19″ Full slide-in, 2 height units
  • Analog- und USB-Schnittstelle
19 Inch Slide-in Housing (Series ELR / Power generation)
  • Autoranging
  • Color Touchscreen
  • IF KE Slot
Space Saving Desktop Style Devices (Series EL)
  • Function generator
  • Portable desk device (Desktop Style)
  • Optional Interfaces
  • USB/Analog/LAN-Ethernet
Space-saving Tabletop Devices in Tower Style (Series EL)
  • AC wide input range 90-264V
  • Flexible input stage for range extension
  • Intuitive operation thanks to color TFT touch panel

Elektro-Automatik - EA-10000 Series DC Power Supplies and Electronic Loads

Large product variety. Extended performance range. Powerful and efficient.
  • Over 180 DC power supplies and electronic loads: programmable, bidirectional, regenerative
  • Extended power ranges: From 600 W up to 30 kW programmable output power, from 6 A up to 1000 A output current, and from 10 V up to 2000 V output voltage
  • Energy recovery greater than 96 % efficiency
  • Safe parallel connection of up to 64 devices in the EA-Power Racks producing up to 1.92 MW
  • Efficient applications test with true autoranging and integrated function generator
  • Easy handling with uniform devices and many interfaces to PCs and PLCs

Elektro-Automatik - Power supplies, variable and isolating transformers, AC DC

EA-3000B
  • Designed for schools, universities and laboratories
  • Designed for industry and system applications
  • Designed for workshop and development
  • Adjustable insulated transformer
  • Output voltages: 0...30 V, 0...300 V or 0...32 V
  • Output currents: 0.5 A, 5 A or 0...5 A
  • Three-digit displays for voltage and current
  • Case closed on top and bottom
  • Safety output sockets
  • 100% duty cycle
  • Safety EN 61010, EN 60950 and EMI EN 61326
EA-4000 B, EA-STT-2000
  • Designed for schools,university and laboratories
  • Designed for industry and system applications
  • Designed for workshop and development
  • Adjustable insulated transformer
  • Output voltages: 0...260 V AC und 0...32 V DC
  • Auxiliary output voltages:
  • 3 V / 12 V / 18 V / 24 V / 230 V AC
  • Output currents: 2 A, 3 A, 4,5 A und 0...5 A
  • Three-digit displays for voltage and current
  • Case closed on top and bottom
  • Safety output sockets
  • 100% duty cycle
  • Safety EN 61010, EN 60950 and EMI EN 61326

Elektro-Automatik - PS/PSI/PSE DC Power Supplies

EA Programmable DC Power Supplies

  • Autoranging
  • Color Touchscreen
  • IF- Plug’n play interface-slot

Space Saving Instruments in Desktop Style (Series PS and PSI)

  • Autoranging
  • Color Touchscreen
  • 3-paths on board Interface

Space Saving Instruments in Tower style

  • Autoranging
  • Colored Touchscreen
  • IF KE Slot

Elektro-Automatik - PSB Bidirectional Programmable DC Power Supplies

  • Autoranging
  • Color Touch Screen
  • 3-ways onboard interface
  • Master-Slave-Bus for parallel connection
  • 19″ Full insertion
  • 3 U or 4 U housing
  • Analog and USB interface, further options retrofittable
  • Microprocessor (FPGA) controlled
  • Color touch panel
  • Internal resistance control
  • Battery test mode
  • Arbitrary generator & car startup curve
  • Optional: Digital, pluggable interface modules
  • SCPI and ModBus protocol
  • LabView VIs and control software

Elektro-Automatik - Series PS 800 SM and PS 800 KSM Built-in Power Supplies

EA-PS 800 KSM
  • Input voltage AC: 90...264 V
  • Input voltage DC: 120...370 V
  • Output power ratings: 10 W, 30 W, 60 W, 78 W, 100 W
  • Output voltages: 12 V and 24 V
  • Output currents: 0.42 A up to 6.5 A
  • Overload- and short-circuit-proof
  • Overtemperature protection
  • Overvoltage protection
  • Natural cooling
  • Protection degree IP20
  • Isolation class II
  • Safety EN 60950
  • EMC EN 61204 (EN 55022 class B)
EA-PS 800 SM 120 W - 480 W
  • Wide input voltage range 90...264 V with active PFC
  • High efficiency up to 93%
  • Output powers: 120 W up to 480 W
  • Output voltages: 12 V, 24 V and 48 V
  • Output currents: 10 A up to 20 A
  • 50% overload for 8 seconds
  • DIN rail mounting
  • Overvoltage protection (OVP)
  • Overtemperature protection (OT)
  • Status indication via LEDs
  • Potential-free signal contact for output OK
  • Natural convection for cooling
  • Safety EN 60950
  • EMI EN 61000-6-1, EN 61000-6-3

Elektro-Automatik - SPI Series Built-in Power Supplies

EA-SPI 100-300 100W - 300W
  • Wide range input 85...264 V AC with active PFC
  • Wide range input 120...360 V DC
  • Inrush current limiter
  • Output powers: 100 W, 150 W, 200 W and 300 W
  • Output voltages:
    • 5 V, 7.5 V, 12 V, 13.5 V, 15 V, 24 V, 27.5 V, 48 V, 54 V
  • Output currents: 2.1 A up to 60 A
  • Output voltage adjustable ±10%
  • Overvoltage protection (OVP)
  • Overcurrent protection (OCP)
  • Overtemperature protection (OTP)
  • Extern on/off
  • Remote sensing
  • Cooling SPI 100 and SPI 150 natural convection
  • Cooling SPI 200 and SPI 300 with fan
  • EMI EN 61000-6-1, EN 61000-6-3

Elektro-Automatik - Turnkey DC Power Rack & Cabinet Systems

EA’s flexible high-power DC supplies and electronic loads are integrated into 19 ” rack power supply or closed cabinet solutions and can be cost-effectively adapted to a wide variety of user requirements, thanks to their modular design and the standardized power and protection modules employed.
The 19 “rack power supply or cabinet system can be designed as pure DC sources, with power supplies, or as pure sinks, with electronic loads. Further still, the EA power supplies can be conventional or bidirectional, and the loads can be conventional or regenerative for a mixed of source and sink capability. High power density units can be easily paralleled up to 1.92MW in output, with up to 2000 VDC.
The DC rack power supply and electronic load series each feature 5 “TFT touch panel display for intuitive control, setup and programming. The intelligent interface allows you to program and test quickly without the need for extensive manual review.

Elektro-Automatik - UPS DSP Multipower

EA-UPS DSP Multipower 1 kVA - 10 kVA
  • Online double conversion principle
  • DSP microprocessor controlled
  • UPS classification VFI-SS-111 by IEC 62040-3
  • Pure sine wave output
  • Advanced intelligent battery management
  • Short-circuit, overload and deep discharge protection
  • Fault alerts and status warnings
  • Cold start and energy saving features
  • Communication port with software
  • Compact size and user friendly operation
  • Options & accessories
  • Additional charging unit
  • Various external battery cabinets for extended autonomy
  • Pluggable SNMP & dry contact boards
  • Three-phase AC supply input*

Elektro-Automatik - UPS Guard LCD2

EA-UPS Guard LCD 2, 650 VA - 2000 VA
  • Line interactive principle
  • UPS classification VI-SY-333 by IEC 62040-3
  • Boost & buck converter with automatic voltage regulation
  • Intelligent battery management
  • User friendly LCD panel
  • Soft start for critical loads
  • Short-circuit, overload and deep discharge protection
  • Overvoltage / Undervoltage protection
  • Input and output voltage displayed on the LCD panel
  • Cold start and energy saving features
  • Communication port with software
  • Telephone / Fax / Modem protection
  • Can be used without batteries as AVR
  • Compact size and user friendly operation

Elektro-Automatik - UPS Informer Compact

EA-UPS Informer Compact 1000 VA - 3000 VA
  • Line interactive principle
  • UPS classification VI-SS-222 according IEC 62040-3
  • Pure sine wave output for any critical load
  • Boost and buck converter with automatic voltage
  • Advanced intelligent battery management
  • Short recharge time for batteries
  • User friendly LCD panel
  • Soft start for critical loads
  • Short-circuit, overload and deep discharge protection
  • Fault alerts and status warnings
  • Output voltage displayed on the LCD panel
  • Cold start and energy saving features
  • Communication port with software
  • Compact size and user friendly operation

Elektro-Automatik - USB to Analog UTA12 Interface

EA-UTA12
  • USB Digital-to-Analog conversion
  • Resolution: min. 12 Bit
  • Simple installation, USB plug ’n play
  • No external supply voltage required
  • For older EA series with analog interface
  • Also for power supplies from other manufacturers
  • Status signals monitorable
  • 2 channels each for control & measuring
  • Software included
  • LabView drivers (VIs)
  • Tutorial for programming in other PC languages