Skip to: content

Fluke - 289 IMSK Industrial Multimeter Service Kit

Manufactured by: Fluke Corporation

Product Overview:

  • True-RMS accuracy with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording give you the results you need.
  • Fluke-i400 AC 400A Current Clamp turns the 289 into a clamp meter.
  • Safety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the job.

Manufactured by: Fluke Corporation
More

This combo kit is built around the Fluke 289, Fluke’s next-gen high performance industrial logging multimeter, combined with the i400 AC current clamp. Together, they help solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. The kit includes special accessories to make you even more productive on the job and will save over 15% compared with the individually priced items. Plus, you'll be working with the most trusted tools in the world.

Fluke 289 DMM Features

  • Provides the ability to log data and graphically
  • TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
  • Review up 10,000 recorded events and logged readings with on-board TrendCapture
  • Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
  • Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
  • Includes premium test leads, alligator clips, and amp jack plugs

Fluke i400 AC Current Clamp Features

  • Provides accurate current measurements up to 400 A ac without breaking electric circuits.
  • Flexible, heat resistant test leads and alligator clips complete this high-performance kit.
  • Soft non-slippery over mold handle prevents from accidental touching live wiring
  • Max. conductor Ø 32 mm

1000V voltage detection range for wide range of applications use

  • Measures up to 1000 V AC/DC voltage
  • Measures up to 10 A AC/DC current
  • Measure resistance up to 500 MΩ
  • Measure frequency up to 1000 kHz max

Safety Features

  • Rated for CAT III 1000 V for added protection
  • Rated for CAT IV 600 V for added protection
  • CE and CSA approved

Models: Fluke 289 IMSK Industrial Multimeter Service Kit

FLUKE-289/IMSK

FLUKE-289/IMSK,INDUSTRIAL MULTIMETER SERVICE KIT

Includes:

  • Fluke 289 True-RMS Data Logging Multimeter
  • Fluke i400 400A AC Current Clamp
  • TL71 Flexible Silicone Test Lead Set
  • AC175 Threaded Alligator Clip Set

Requires Fluke ir3000 FC Infrared Connector for Fluke Connect communication

Specifications for 289
Function
DC volts Range / resolution 50.000 mV, 500.00 mV, 5.0000 V, 50.000 V, 500.00 V, 1000.0 V
Basic accuracy 0.025%
AC volts Range / resolution 50.000 mV, 500.00 mV, 5.0000 V, 50.000 V, 500.00 V, 1000.0 V
Basic accuracy 0.4% (True-RMS)
DC current Range / resolution 500.00 μA, 5000.0 μA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 A
Basic accuracy 0.05%
AC current Range / resolution 500.00 μA, 5000.0 μA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 A
Basic accuracy 0.6% (True-RMS)
Temperature (excluding probe) Range / resolution -200.0°C to 1350.0°C (-328.0°F to 2462.0°F)
Basic accuracy 1.0%
Resistance Range / resolution 50.000 Ω, 500.00 Ω, 5.0000 kΩ, 50.000 kΩ, 500.00 kΩ, 5.0000 MΩ, 50.00 MΩ, 500.0 MΩ
Basic accuracy 0.05%
Capacitance Range / resolution 1.000 nF,10.00 nF 100.0 nF, 1.000 μF, 10.00 μF, 100.0 μF, 1000 μF, 10.00 mF, 100 mF
Basic accuracy 1.0%
Frequency Range / resolution 99.999 Hz, 999.99 Hz, 9.9999 kHz, 99.999 kHz, 999.99 kHz
Basic accuracy 0.005%
Connectivity Optional infrared connector via Fluke ir3000 FC
General Specifications
Maximum voltage between any terminal and earth ground 1000 V
Battery type 6 AA alkaline batteries, NEDA 15A IECLR6
Battery life 100 hours minimum, 200 hours in logging mode
Temperature Operating -20°C to 55°C
Storage -40°C to 60°C
Relative humidity 0 to 90% (0 to 37°C), 0 to 65% (37°C to 45°C), 0 to 45% (45°C to 55°C)
Electromagnetic compatibility EMC EN61326–1
Vibration Random vibration per MIL-PRF-28800F Class 2
Shock 1-meter drop per IEC/EN 61010–1 3rd Edition
Size (H x W x L) 22.2 x 10.2 x 6 cm (8.75 x 4.03 x 2.38 in)
Weight 870.9 g (28 oz)
Multiple on screen displays Yes
True-RMS AC bandwidth 100 kHz
dBV/dBm Yes
DC mV resolution 1 μV
Megohm range Up to 500 MΩ
Conductance 50.00 nS
Continuity beeper Yes
Battery/fuse access Yes/Yes
Elapse time clock Yes
Time of day clock Yes
Min-max-avg Yes
Duty cycle Yes
Pulse width Yes
Isolated optical interface Yes
Auto/touch hold Yes
Reading memory Yes
Log to PC Yes
Interval/event logging Yes
Logging memory Up to 15,000 readings
Wireless connectivity (optional)  
Specifications: Fluke i400 AC Current Clamp
Nominal current range 400 A
Continuous current range 1 A - 400 A
Maximum non-destructive current 1000 A
Lowest measurable current 1 A
Basic accuracy 2% + 0.06 A
(45-400 Hz)
(% reading + floorspec)
Useable frequency 5 Hz - 20 kHz
Output level(s) 1 mA/A
Safety Specifications
Safety CAT IV 600 V, CAT III, 1000 V
Maximum voltage 1000 V AC rms from earth to ground, in compliance with EN61010
Mechanical and General Specifications
Warranty 1 year
Maximum conductor diameter 32 mm (1.25 in)
Maximum conductor size (busbar) 750 MCM
Output cable length 1.5 m (59 in)
Shrouded banana plugs Yes

More Product Information

Fluke - 87V Industrial Multimeter
  • Identify complex signal problems fast
  • Supports accurate measurements on VFDs using a low-pass filter
  • Captures intermittents as fast as 250 µS with Peak Capture

Fluke - 83V Average Responding Industrial Multimeter
  • Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
  • Large digit display with bright, two-level backlight makes the 83V significantly easier to read than older models
  • 6000 counts, 3-3/4 digits
  • Measure up to 1000 V AC and DC
  • Measure up to 10 A, 20 A for up to 30 seconds
  • Frequency to 200 kHz and % duty cycle
  • Resistance, continuity and diode test
  • 10,000 µF capacitance range for components and motor caps
  • Min/Max-Average recording with Min/Max Alert to capture variations automatically
  • Relative mode to remove test lead interference from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Touch Hold to capture stable readings avoiding noisy signals
  • Large display digits and two-level bright white backlight for increased visibility
  • Analog bargraph for fast changing or unstable signals
  • Input Alert provides audible warning against wrong use of input jacks
  • Improved selectable sleep mode for long battery life
  • Access door for fast battery changes without breaking the calibration seal
  • "Classic" design with new removable holster with built in test lead and probe storage
  • Lifetime warranty
Electrical safety
All inputs are updated to the 3rd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.
  • Measure AC current with an optional current clamp accessory

Fluke Networks - Industrial Ethernet DSX CableAnalyzer™ Kit
  • Copper cable certifier for TIA category 5 through 6A, twisted-pair cabling with touchscreen project management, TIA Level IIIe accuracy, advanced troubleshooting, 8-hour battery life
  • Startup Faster & Prevent Downtime - Validate at the Machine Builder and again when commissioning the machine at the Plant and find marginal cables before they become a problem
  • Speed Troubleshooting - Avoid wasting time installing unnecessary bypass cables
  • Pass/Fail indication in 10 seconds with full measurement details
  • Supports RJ45 and M12D and M12X connectors
  • Works on cables running EtherNet/IP™, Profnet™ , ModBus TCP™ , EtherCAT and other protocols
  • Validate Cable Performance to Standards for Industrial Premises (TIA 1005-A, ISO 11801:3) Document test results with LinkWare software

Fluke - ii900 Sonic Industrial Imager
  • Do more with the same air compressors–delay the capital expense of installing an additional compressor
  • Ensure proper air pressure to your pneumatic equipment
  • Lower energy costs
  • Reduce leak detection time
  • Improve reliability in your production line
  • Make leak detection part of your typical maintenance routine
  • Train the team in a matter of minutes
  • Validate repairs on the spot

Fluke - 120B Series Industrial ScopeMeter handheld Oscilloscopes
  • Dual-input digital oscilloscope and multimeter in a ScopeMeter® test tool
  • Available with a 40 MHz or 20 MHz oscilloscope bandwidth
  • Features Connect-and-View™ trigger simplicity for hands-off operation
  • Includes IntellaSet™ technology to automatically and intelligently adjust numerical readout based on measured signal
  • Provides a dual-input waveform and meter reading recorder for trending data over extended periods

Fluke - 77 IV Digital Multimeter
  • Large display
  • Backlight for work in dim areas
  • Min / Max to record signal fluctuations
  • Ergonomic overmolded housing with integrated probe holders
  • Free your hands with the optional TPAK magnetic hanger
  • Auto and Manual ranging
  • Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards
The 77 IV replaces the 77. Move up to superior utility and safety today.

Fluke - 113 Digital Multimeter
  • VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity*
  • True RMS for accurate AC measurements on non-linear loads
  • A large backlit display allows for easy visibility in low-lit areas
  • Record signal fluctuations using the Min/Max function
  • Diode test for testing general-purpose germanium, silicon, and power diodes
  • Integral holster with probe holders for easy storage
  • Auto and Manual ranging for added user functionality
  • The optional TPAK magnetic hanger allows the user hands-free flexibility

Fluke - 114 Electrical Multimeter
  • Ideal Digital Multimeter for “go/no-go” testing
  • Features AutoVolt automatic AC/DC voltage selection
  • Includes low input impedance to help prevent false readings due to ghost voltage
  • Presents a large white LED backlight for working in poorly lit areas
  • Measures resistance, continuity, frequency, and capacitance
  • Provides Min/Max/Average with elapsed time to record signal fluctuations

Fluke - 787 ProcessMeter Digital Multimeter
  • DMM and a loop calibrator in one rugged, handheld tool
  • Provides a precision 1000 V, 440 mA True-RMS digital multimeter designed to meet 1000 volt IEC 1010 CAT III standards
  • Features a clear LCD with backlight; 4,000 counts (30,000 counts for DC current)
  • Performs frequency measurements to 20 kHz

Fluke Corporation

https://www.fluke.com/en-us

Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.

From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, metrologists, medical-device manufacturers, and computer network professionals — people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.

Fluke has achieved the number one or number two position in every market in which it competes. The Fluke brand has a reputation for portability, ruggedness, safety, ease of use and rigid standards of quality.

Contact Details

Fluke Corporation Headquarters

6920 Seaway Blvd., Everett, WA 98203

Mailing address: PO Box 9090, Everett, Washington 98206-9090

Phone: 1-425-347-6100

Technical Support Email: fluke-info@fluke.com



Condition monitoring
Power monitoring Vibration monitoring


Connected reliability
Suite for Maximo






Mechanical maintenance
Laser alignment Vibration analysis



Precision measurement
Bench instruments Data acquisition

Temperature measurement
Contact thermometers IR thermometers

Thermal Imaging
IR Windows Thermal cameras

Line Cards: 
Test & Measurement
Imaging